Scott AM Vacuum Casting Resins

 TEST TYPE ISO8891804080458045-18045-28045-38060-18060-28060-3SG-95805162358263
UL94 5VA
FAR 25
9012
FDA wet & dry
Description-Flexible rubberPPPPPP / PEPP / PEPEPP / PEPP / PEPP / PEABSABSABSABSABS
PropertiesSoft
Semi rigid
Rigid
High temp.
UV stable
FDA
OthersLow temp.
Product colour at 25°C-White / trans­lucentWhite / opaqueWhite / trans­parentWhite / translucentSlightly yellow / translucentColour­less / trans­parentWhite / opaqueWhite / opaqueWhite trans­lucent
Hardness (Shore A/D)86820 A - 90 A70 D74 D70 D61 D48 D80 D80 D80 D74 D - 82 D77 D - 84 D83 D83 D77 D
Flexural strength (MPa)178-42----6048649995809351
Flexural modulus (MPa)178-1050----13101010132024002200180022001310
Tensile modulus (MPa)R 527-9429707004001501225--252121501850--
Tensile strength (MPa)R 5272 - 17273224121047--5863676840
Heat deflection temp °C (HDT)--6579534235105 - 17590 - 110115 - 1807292988090
Glass transition temp °C (Tg)--78----127 - 195105 - 132125 - 1956890115-108
Elongation yield (%)----------653--
Elongatoin at break (%)R 527270 - 330505560657543--2518141525
Tear strength (MPa)347 - 34-------------
Yield strength (MPa)R 527---------64.26267--
Izod impact (kJ/m2180-15----14151312161510-
Thermal conductivity (W/mK)BS 847-0.201-------0.2080.2250.2417-
Specific gravity (kg/dm3 at 25 °C)Part A-1.01.051.071.071.071.071.031.031.031.071.121.111.31.10
Part B-1.161.221.161.161.161.161.211.211.211.191.191.21.191.12
Part C-0.99--0.990.990.99--------
Viscosity (cPs at 25°C)Part A-470120010001000100010002202202201300755085010001500
Part B-170140220220220220505050130180200160150
Part C-90--909090--------
Mixing ratio by weight (A:B:C)-100:100:0 - 300110:90100:140100:140:25100:140:50100:140:75100:400100:250100:500100:150100:200100:200100:15029:100
Pot life sec. (100g at 25°C)-200 - 360300345320300270285270330300300360360720
Demoulding time (at 70°C) (hrs)-1.01.5 - 2.01.01.01.01.01.01.00.50.750.750.5 - 1.01.02.0
Shrinkage (%) according to wall thickness-1.00.50.40.40.40.40.50.50.50.20.2 - 0.30.30.30.5 - 1.0
TEST TYPE ISO8891804080458045-18045-28045-38060-18060-28060-3SG-95805162358263
UL94 5VA
FAR 25
9012
FDA wet & dry
ProductCured colourShore Hardness (A/D) @23°CDe-mould Time (mins) @70°CHeat Deflection (°C)Glass Transition (°C)Flexural Modulus (N/mm2)Properties
(see individual data sheets for full technical specifications)
SG95Colourless / Transparent82D4572852195Excellent all round ABS type properties. Suitably strong for snap fits, clear for perfect colour matching.
SG95 LPColourless / Transparent82D7072852195Excellent all round ABS type properties. Suitably strong for snap fits, clear for perfect colour matching. Long pot life
6235Milky White83D25-6095-1001151800Well-balanced and good physical properties. Pigmentable
8040Trans white70D90-12065781050Very low viscosity, excellent flow properties for thin wall section moulding. Easy to colour. Very good all round PP type material.
804574D6079PP/PE Type. High impac. Snap fits. Pigmentable.
8051White / Translucent84D40921965ABS type, high heat stability, strong flexing properties.
8060HT-1Transparent / Yellowish80D601005-175*127-1951310Similar to PP/PE. High heat resistance. Very high impact strength.
8263White / Translucent80D6080Similar to ABS. Flame retardant UL94V-0. Good impact strength. Electrical enclosures.
8891White / Translucent20-90A30-60Low viscosity flexible rubber. Adjustable hardness.
9012White opaque74D12090168992Simulates ABS. Complaint to both Dry and Wet food FDA requirements.
ProductCured colourShore Hardness (A/D) @20°CDe-mould Time (mins) @70°CHeat Deflection (°C)Glass Transition (°C)Flexural Modulus (N/mm2)Properties
(see individual data sheets for full technical specifications)

* After post curing schedule (see individual data sheets)

All information is based on results gained from experience and tests and is believed to be accurate but is given without acceptance of liability for loss or damage attributable to reliance thereon. Users should always carry out sufficient tests to establish the suitability of any products for their intended applications.

Last update: 20/07/2020


Scott AM the Full Service Supplier offers the widest range of machines, mould making and casting materials, tools and accessories, complete customer training - worldwide. Scott AM Tooling and Casting Technologies guarantee by far the quickest return on investment.